The examples below discuss how to run Comsol interactively, or non-interactively in batch mode (without any GUI interface), and how to submit a Comsol job to the Odyssey job scheduler SLURM.

Getting started

Obtain a FAS RC account by visiting:

Odyssey quick start guide:

Please consult the documentation available at the above link for connecting to FAS systems and familiarizing yourself with the SLURM queue management system. For any help on Odyssey, contact FAS RC:

Using Comsol


  1. Due to the limited number of COMSOL licenses, we sometimes run out of licenses. If you get a message to that effect, wait for some time before trying again.  Also, please log out of any sessions when not in use. If your work requires regular use of COMSOL, please consider purchasing a copy from COMSOL.
  2. With the introduction of OnDemand VDI (see below), the only supported use of comsol will be on Odyssey.
  3. SEAS Comsol licenses are to be used for only academic non-profit work.

OnDemand Virtual Desktop (VDI)

You can now work conveniently via a browser on odyssey using the virtual desktop infrastructure (VDI) known as OnDemand on Odyssey. For more details, please visit:

Interactive use

The best option for working interactively on Odyssey is to use OnDemand VDI (see above). If you are authorized to use Comsol, the latest version should be available on OnDemand as an app. Otherwise, open a terminal on the OnDemand remote desktop and proceed as follows.

Comsol versions available via the new module system:

module-query comsol

These are under the new module system. Once you determine a version to use, run it interactively as follows:

module load comsol/5.4-fasrc01

Running comsol in batch via slurm

In order to run Comsol mph files in the batch mode (i.e. solving the model without using the GUI interface) you need an input file (usually with extension .mph) created with COMSOL GUI. Once you have an input file (we use, for eg. busbar.mph in the following example), prepare a batch submission script for COMSOL using the following template (called ""):

#SBATCH -n 8        # Number of cores 
#SBATCH -N 1        # Number of nodes (all cores will be on this node)
#SBATCH -t 0-1:00   # Runtime in D-HH:MM format 
#SBATCH -p general  # Partition to submit to 
# Memory per CPU for multinode/MPI work
# use --mem= for single node work, and specify -N 1
#SBATCH --mem-per-cpu=500 #Memory per cpu in MB (see also --mem) 

module load comsol/5.4-fasrc01
# To run with an older module (example):
# source
# module load legacy

#For an earlier version:
#module load centos6
#module load legacy
# module load seas/comsol5.1
# The input file, for example, is assumed to be a COMSOL generated
# file called 'busbar.mph'.


# use $SLURM_NTASKS env set by #SBATCH -n value
comsol batch -np $COMSOL_NUM_THREADS -inputfile $INPUT_FILENAME -outputfile $OUTPUT_FILENAME -batchlog $OUTLOG

# Report some useful info
/bin/uname -a



You can submit the script to SLURM with:


For further details on using Odyssey and  SLURM (such as monitoring or canceling your jobs) please visit or the list of convenient SLURM commands at


Comsol documentation is generally found in the COMSOL installation directories. You can find out the installation directory for the particular module you are using with, eg.:

module display seas/comsol5.3a

The above command should display something like setenv("COMSOL_HOME","/n/sw/comsol53a")  in  addition to other locations. In this case, the documentation directory is: 


You can view the pdf files in the directoried in the above directory with a pdf reader, such as evince:

Comsol documentation is usually found under html and pdf directories. You can open the pdf documentation (from an OnDemand remote desktop terminal):

Alternatively, you can copy the pdf files to your local desktop/laptop.

evince /n/sw/comsol53a/doc/pdf/COMSOL_Multiphysics/IntroductionToCOMSOLMultiphysics.pdf

Comsol examples

As under Documentation, determine the installation directory for COMSOL. For example, for comsol5.3, it is: 


comsol examples are in:


For example, the busbar example is in:


You need to copy all the files with busbar in them in order to run the example script:

cp  /n/sw/comsol53/applications/COMSOL_Multiphysics/Multiphysics/ busbar* .

(Note the dot (.) at the end on the line above)